Product Information
Description
Hafele 365.13.712 Flap stay Fitting, Salice Pacta
Model C, without automatic closing spring
Note: This product can only be purchased in minimum quantity ofInstallation : Clips onto cabinet Drilling depth : (1/2") 13 mm Adjustment : Side adjustment: (-1/16" to +1/16") -1.5 to +1.5 mm
Height adjustment: (-1/16" to +1/16") -1.5 to +1.5 mm
Depth adjustment: (-1/64" to +1/8") -0.5 to +2.8 mmOverlay : (11/16") 17 mm (fixed) Flap height : (11 1/32" - 15 3/4") 280 - 400 mm Flap width : Material : Zinc alloy Finish : Nickel plated
: Door thickness mm
16
17
18
19
20
21
22
23
24
25
26
27
28
Distance to cup E (fixed) 4.5 mm
1.3
2.1
3.0
3.9
4.8
5.7
6.6
7.5
8.5
9.4
10.4
11.3
12.3
Minimum gap F
Door thickness mm
16
17
18
19
20
21
22
23
24
25
26
27
28
Distance to cup E (fixed) 4.5 mm
1.3
2.1
3.0
3.9
4.8
5.7
6.6
7.5
8.5
9.4
10.4
11.3
12.3
Minimum gap F
Drilling pattern : (1) Side panel(2) Safety lock screw D = overlay
Cabinet
Flap
Drilling pattern
(1) Side panel(2) Safety lock screw D = overlay
Cabinet
Flap
Installation : Installation
1.
2.
3.
4.
Adjustment facility
(1) Depth adjustment
(2) Side adjustment
(3) Height adjustment
Fixing the safety lock screw
Inserting the soft opening mechanism
Slide front of soft opening mechanism onto the designated axle and clip-in. Tools are not required for mounting the soft opening mechanism.
5.
6.
Clip soft opening mechanism into rear axle
Clip cover housing onto hinge arm and then onto cup.
Disassembly
(1) Lift flap
(2) Remove soft opening mechanism
(3) Loosen safety lock screw
(4) Remove hinge arm from mounting plate by applying pressure onto clip of mounting plate from above