Hafele 003.15.063 Titebond III, Ultimate Wood Glue 2.15 gallons

Product Information

• Description

  Manufacturer: Hafele
  Item: 003.15.063
  
  Product Title: Titebond® III, Ultimate Wood Glue, 2.15 gallons
  
  Category: Titebond® III, Ultimate Wood Glue,
  
  Item Details …
  
  -
  
  - APPLICATION GUIDELINES
  
  -
  
  -
  
  - Application temperature:
  
  -
  
  - Above 47°F
  
  -
  
  - Open assembly time:
  
  -
  
  - 8-10 minutes (70°F/50% RH)
  
  -
  
  - Total assembly time:
  
  -
  
  - 20-25 minutes (70°F/50% RH)
  
  -
  
  - Minimum required spread:
  
  -
  
  - Approximately 6 mils or 250 square feet per gallon.
  
  -
  
  - Required clamping pressure:
  
  -
  
  - Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
  
  -
  
  - Methods of application:
  
  -
  
  - Plastic bottles for fine applications; glue may also spread with a roller spreader or brush.
  
  -
  
  - Cleanup:
  
  -
  
  - Damp cloth while glue is wet. Scrape off and sand dried excess.
  
  - BOND STRENGTH ASTM D-905 (On Hard Maple)
  
  -
  
  - Temperature
  
  -
  
  -
  
  - Strength psi
  
  -
  
  -
  
  - % wood failure
  
  -
  
  - Room Temperature 4,000 57
  
  - 150° Overnight 800 0
  
  -
  
  - LIMITATIONS
  
  -
  
  -
  
  - Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping the bottle on a hard a surface until the product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use.
  
  -
  
  -
  
  - KEEP FROM FREEZING
  
  -
  
  -
  
  - KEEP OUT OF THE REACH OF CHILDREN
  
  -
  
  - Waterproof – Passes ANSI/HPVA Type I Specification
  
  - Superior strength
  
  - Longer open time
  
  - Lower application temperature
  
  - Resists solvents, heat and mildew
  
  - Unaffected by finishes
  
  - Water cleanup & Non-toxic
  
  - FDA approved for indirect food contact
  
  - Sands easily without softening
  
  - Safer than traditional waterproof glues

• Data Sheet

  Detailed Data Sheet

• Product Resources

  Titebond III Ultimate Glue Specifications
  
  TCH_Furniture_Cabinetry_Hardware_2022|Page 12.52
  
  

• Specifications

  For detailed PDF specifications, click:
  Hafele Catalog Page: selection_12.20-12.20.pdf
  
  

• Brand PDF Catalogs

  Click on a Category to open a PDF catalog:
  
  Sliding and Folding Catalog
  
  Fineline Brochure
  
  Free Flap Fittings Brochure
  
  The Complete Architectural Hardware Catalog
  
  Dialock In Hotels Catalog
  
  Dialock System Catalog
  
  IXConnect Invisible Heroes
  
  One Room One Face Catalog
  
  Architectural Hardware: American Standard Catalog
  
  Closet Catalog
  
  Decorative Wood Catalog
  
  Cornerstone Catalog
  
  Decorative Hardware Catalog
  
  Kitchen Solutions Catalog
  
  Loox5 Lighting Catalog
  
  Furniture Cabinetry Hardware Catalog
  
  Designing Accessibility HEWI Catalog
  
  The Complete Cabinet
  
  

• Required Products & Optional Accessories

  Note: Add the current product in cart before ordering required products below ...
  
  Required Products:
  
  Blade Tip, for Glü-Bot (choose one):
  

  • undefined

    003.49.806

    Click to order

  
  
  Lid and Retaining Ring, for Glü-Bot (choose one):
  

  • undefined

    003.49.803

    Click to order