Manufacturer: Hafele
Item: 003.55.050
Product Title: Titebond®, UA 920 Sealant, 10.1 oz, White
Category: Titebond®, UA 920 Sealant, 10.1 oz
Item Details …
-
- APPLICATION GUIDELINES
-
-
- Application temperature:
-
- Above 40°F
-
-
-
- Service temperature:
-
- -40°F to 180°F
-
- Methods of application:
-
- Cartridge/caulking gun
-
- Working time:
-
- Approximately 15 minutes for a 1/4” bead.
-
- Working surfaces:
-
- For best results, surfaces must be cleaned down to the original substrate, dry and free from any material that may deter adhesion.
-
- Cleanup:
-
- Clean tools and excess material with soap and water before it dries. Remove cured sealant by cutting with a sharp-edged tool.
-
- LIMITATIONS
-
- Do not apply if rain is expected within 12 hours. Air, sealant, and surface temperature should be above 40°F. Allow at least 2 hours of drying time before painting with acrylic or elastomeric coatings. If joint depth exceeds 1/4”, use backing material. Not designed for continuous submersion or use below the waterline. Do not use for aquariums.
-
- Note
-
- Titebond UA 920 Clear (8741) will be white during application but will clear within 7-14 days, depending on temperature, humidity and bead size.
- Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Allow at least 2 hours of drying time before painting with acrylic or elastomeric coatings. If joint depth exceeds 1/4”, use backing material. Not designed for continuous submersion or use below the waterline. Do not use for aquariums.
- Titebond UA 920 Clear (8741) will be white during application but will clear within 7 - 14 days, depending on temperature, humidity and bead size.
- Permanently flexible and airtight, water-resistant seal
- Excellent adhesion to most building materials
- Ideal for interior/exterior applications
- Soap and water cleanup
- Paintable with water-based(latex-based) paints
- VOC-compliant
- Mildew resistant
- UV-resistant
- Suitable for all climates
- No priming or mixing required
- 50% total joint movement
- 800% elongation
- Product type : Titebond®
- Capacity : 10.1 oz
