Hafele 941.25.014 Slido D-Line11 120L Fitting Set, with 2 track stoppers
Product Information
Description
Manufacturer: Hafele
Item: 941.25.014
Product Title: Sliding door fitting, Slido D-Line11 120L, set without running track, For 1-leaf glass sliding doors, for door weight 120 kg, without soft and self closing mechanism, Running gear with axle bearing, Track buffer with retaining spring, door width: ?500 mm
Category: Sliding door fitting, Häfele Slido D-Line11 50L / 80L / 120L, set without running track, For 1-leaf glass sliding doors, for door weight 50–120 kg
Item Details …
- Soft and self closing mechanism:
- low opening force – easy and convenient operation
- tested with increased closing speed up to 0.5 m/s
- Can be retrofitted or replaced at any time
- Accessibility: Opening force with door weight 50 kg: 18 N / 80 kg: 21 N
- Shock absorber:
- Closing speed with shock absorber tested up to 0.4 m/s
- Number of doors per system max. : 1 to 2
- Number of doors : 1.00
- For door material : glass
- Controller installation options : Ceiling installation, Wall mounting
- For glass thickness with tempered safety glass : 8 mm, 10 mm, 12.7 mm
- For glass thickness with laminated glass : 8–8,7 mm, 10–10,7 mm
- Adjustment facility : Height adjustment: ±4 mm
- Area of application : for 1-leaf and 2-leaf sliding doors
- Note on door thickness : For tempered safety glass: 3/8" and 1/2"For laminated glass: 11/32" and 7/16"
- Running position : Top
- Installation reference : No end cap is available for ceiling installation with fascia on both sides. A pair of end caps can be attached end to end and glued vertically in the centre of the running track (optional).
- Order reference
- Please order glass clamp shoe, tracks, panels and accessories separately.
- Order 2 sets for 2-leaf sliding doors.
- Supplied with:
- 2 running gears
- 1 clear threshold floor guide
- 2 track buffer with retaining spring
Additional Information …
Please note when using shock absorber with retaining spring: The door may not close completely if the closing speed is too low, if it is too high, the door may bounce back slightly.For sets without or with soft and self closing mechanism on one side: If required, soft and self closing mechanism or shock absorber can be retrofitted.Data Sheet
Product Resources
Required Products & Optional Accessories
Note: Add the current product in cart before ordering required products below ...
Required Products:
Mounting Rail, High, Pre-Drilled, Width 8 mm (choose one):for Häfele Slido D-Line11, length 2000 mm
for Häfele Slido D-Line11, length 3000 mm941.25.822
941.25.832Click to order
Click to order
Mounting Rail, High, Pre-Drilled, Width 19 mm (choose one):for Häfele Slido D-Line11, length 2000 mm
for Häfele Slido D-Line11, length 3000 mm941.25.823
941.25.833Click to order
Click to order
Single Running Track, Pre-drilled, W x H: 31 x 33 mm (choose one):For Slido D-Line11, Mill Finish, Length: 6’ 6 3/4” (2 m)
For Slido D-Line11, Clear Anodized Finish, Length: 6' 6 3/4" (2 m)
For Slido D-Line11, Mill Finsh, Length: 9’ 10 1/8” (3 m )
For Slido D-Line11, Clear Anodized Finish, Length: 9' 10 1/8" (3 m)
For Slido D-Line11, Mill Finish, Length: (19’ 8 1/4”) 6 m
For Slido D-Line11, Clear Anodized Finish, Length: 19' 8 1/4" (6 m)940.43.921
940.43.922
940.43.931
940.43.932
940.43.961
940.43.962Click to order
Click to order
Click to order
Click to order
Click to order
Click to order
Single running track, Pre-drilled, W x H: 47.5 x 47 mm (choose one):For Slido D-Line11, Aluminum, silver colored anodized, length: 3,000 mm 940.43.930 Click to order
Double running track, Pre-drilled, W x H: 70 x 33 mm (choose one):For Slido D-Line11, Aluminum, silver colored anodized, length: 2,000 mm
For Slido D-Line11, Aluminum, silver colored anodized, length: 3,000 mm
For Slido D-Line11, Aluminum, silver colored anodized, length: 6,000 mm941.02.920
941.02.930
941.02.960Click to order
Click to order
Click to order
Optional Accessories:- Soft and Self Closing Mechanism, Slido Classic
- Shock absorber, Slido Classic
- Safety Pin and Safety Screw Set, For Running Track and Mounting Rail
- Profile, Self-Adhesive, for 8 - 10 mm (5/16 - 13/32") Thick Glass
- Centering Door Stop, For glass thickness 8, 10, 12 mm
- Track Stopper, Slido D-Line11 additional set for 50P-120P, 50C-120C, 50I-120I
- Clip-On Fascia, For Running Track
- Wrench, for Height Adjustment
- Gasket, For Glass Thickness (3/8") 10mm
- Fixed Glass Fixing Profile, For Wall or Floor
- Fixed Glass Fixing Profile, For Upper Running Track
- End Cap Set, For Clip-On Fascia Cover
- Floor Guide, Nickel Plated, Matt, for Glass Thickness: 8.10, 12.7 mm
- End cap set, For running track and panel
- Clip-on panel, for running track
- Clip-on panel, For running track, for integration in suspended ceilings
- Mounting bracket, with screw and nut
- Glass Door Lock, Toplock for European Profile Cylinder
- Upper Track Cleaning Tool, For Hawa Porta, Divido
- Sliding Door Hardware, Slido D-Line11, additional set for 50-L-120-L
Brand PDF Catalogs
Click on a Category to open a PDF catalog:
Sliding and Folding Catalog
Fineline Brochure
Free Flap Fittings Brochure
The Complete Architectural Hardware Catalog
Dialock In Hotels Catalog
Dialock System Catalog
IXConnect Invisible Heroes
One Room One Face Catalog
Architectural Hardware: American Standard Catalog
Closet Catalog
Decorative Wood Catalog
Cornerstone Catalog
Decorative Hardware Catalog
Kitchen Solutions Catalog
Loox5 Lighting Catalog
Furniture Cabinetry Hardware Catalog
Designing Accessibility HEWI Catalog
The Complete Cabinet
Cannot find your product? click: Help!. Our product experts will assist you.
Quick Metric Conversions: 25mm = 1 inch (approx), 2.5cm = 1 inch (approx), 96mm = 3.75 inches
Quick Metric Conversions: 25mm = 1 inch (approx), 2.5cm = 1 inch (approx), 96mm = 3.75 inches